Hotplates and Stirrers
Cole-Parmer 316 Stainless Steel Shaft, 3/8" dia x 30" L (accepts 5/16" bore dia propeller)
316 Stainless Steel Shaft, 3/8" dia x 30" L (accepts 5/16" bore dia propeller), Update clamps, mounts, shafts and propellers to accommodate new protocols. Replacement parts keep your overhead mixer running smoothly.
HEPATOCHEM 8 X 2 ml vials photochemistry holder for PhotoRedOx Box, Duo, and TC
8 X 2 ml vials photochemistry holder for PhotoRedOx Box™ Single HCK1006-01-016, PhotoRedOx Box™ Duo HCK1006-01-023, and PhotoRedOx Box™ TC HCK1006-01-025
Chemglass Life Sciences Stir Bar, Giant, Magnetic, PTFE, Length x Diameter: 159 x 27mm / 6-1/4 x 1-1/16 inches
Stir Bar, Giant, Magnetic, PTFE, Length x Diameter: 159 x 27mm / 6-1/4 x 1-1/16 inches. This heavy duty PTFE stir bar is capable of mixing volumes up to a 50 gallon drum. Perfect for use with carboys up to 12 gallon. The bar will fit into a minimum neck diameter of 32mm. Manufactured with FDA-grade and USP Class VI PTFE.
Chemglass Life Sciences Stir Bar, Magnetic, Glass, Length x Dia. in mm: 22.2 x 6.35, Length x Dia. in inches: 7/8 x 1/4
Stir Bar, Magnetic, Glass, Length x Dia. in mm: 22.2 x 6.35, Length x Dia. in inches: 7/8 x 1/4. Borosilicate covered Alnico magnet for use in high temperature reactions.
Chemglass Life Sciences Stir Bar, Magnetic, Egg-shaped, fits 100mL- 250mL flask, Length x Dia. in inches: 1 x 1/2
Stir Bar, Magnetic, Egg-shaped, fits 100mL- 250mL flask, Length x Dia. in inches: 1 x 1/2. Egg-shaped magnetic stirring bar provides its own pivot point without separate ring or abrupt change in contour. Designed for use in round bottom vessels, it is shaped to spin freely, unrestricted by the vessel contour. Manufactured with FDA-grade and USP Class VI PTFE.SEE CG-2005-20 FOR STIR BAR KIT
Chemglass Life Sciences Stirring Shaft, 19mm, Button Style, for 12000ml. to 22000ml. Flasks, 725mm OAL
Stirring Shaft, 19mm, Button Style, for 12000ml. to 22000ml. Flasks, 725mm OAL. A 19mm OD precision ground stirrer shaft to fit CG-2082 and CG-2083 19mm bearings. Side button for attachment of CG-2089 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2088. ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences Stirrer Blade, PTFE, 10mm, for 250mL to 500mL Flasks, 19mm Width x 60mm Length, 24/40 minimum joint clearance
Stirrer Blade, PTFE, 10mm, for 250mL to 500mL Flasks, 19mm Width x 60mm Length, 24/40 minimum joint clearance. Stirrer blade made of 1/8" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 10mm OD.
Chemglass Life Sciences Stir Bar, Magnetic, PTFE, Turbo, Rare Earth, Elliptical, 50 x 24 mm
Exceptional strength coupled with almost total resistance to demagnetisation. Identified by an inert carbon black spot.
Ace Glass, Inc. PTFE bearing, 24/40 inner joint, 10mm shaft
Debris-free PTFE stirrer bearing with 24/40 inner joint, for use with 10mm shaft, totally eliminates flaking into the reaction. Vacuum tight and chemically resistant. 500rpm maximum with polished glass or stainless steel stir shafts.
Chemglass Life Sciences Stir Bar, Magnetic, PTFE, Length x Dia. in mm: 25.4 x 9.52, Length x Dia. in inches: 1 x 3/8
Stir Bar, Magnetic, PTFE, Length x Dia. in mm: 25.4 x 9.52, Length x Dia. in inches: 1 x 3/8. Octagon cross-section having a molded-in pivot ring manufactured with FDA-grade and USP Class VI PTFE. The PTFE coated Alnico magnet permits magnetic agitation without contamination.SEE CG-2001-50 FOR STIR BAR KIT
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Button Style, for 12000mL to 22000mL Flasks, 725mm OAL
Stirring Shaft, 19mm, Polished, Button Style, for 12000mL to 22000mL Flasks, 725mm OAL. A 19mm precision ground and polished stirrer shaft to fit CG-2086 19mm PTFE bearings. Side button for attachment of CG-2089 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2085.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.